All Products

Info:C3S X 1 1/2 SHORT SER DR SHAFT

Info:Bussmann 3531 Semi-Conductor Fuse Block, 600 VAC, 60 A, 5 hp Power Rating, 3 Poles

Info:Greenlee® 35310 Thrust Flat Washer, 4000 lb Max Pulling Force, Floor Mount, For Use With Super Tugger® 6001 Cable Puller

Info:Woodhead® 35310 130094 Offset Eye Single Weave Split Rod Mesh Straight Standard Duty Support Grip, 5040 lb Breaking Strength, 3.5 to 3.99 in Cable, Bronze, Tin Coated

Info:Greenlee® 35311 Right Angle Sheave, For Use With Tugger® 640 Series Cable Puller, 0.627 in ID x 1.06 in Dia, 4000 lb Max Pulling Force, Floor Mount

Info:Greenlee® 35313 Type B Sprocket With Spline, For Use With Tugger® 640 Series Cable Puller, #35-12, 4000 lb Max Pulling Force, Floor Mount

Info:SEALS

Info:PLATE UNIT-ANTIROTATION

Info:Greenlee® 35320 Flat Washer, 4000 lb Max Pulling Force, Floor Mount, 4.8 x 8 x 0.06 in Backing, For Use With Tugger® 640 Series Cable Puller

Info:Greenlee® 35322 Ramp Bearing, 4000 lb Max Pulling Force, Floor Mount, Delrin®, For Use With Tugger® 640 Series Cable Puller

Info:Timken® 35326-30000 35000 Single Row Bearing Cup, 3.265 in Dia Outside, 11/16 in W Cup, 7/8 in W Bearing, 0.03 in Max House Fillet Radius, 3.11 in Frontface/2.99 in Backface Dia Max House Shoulder

Info:Greenlee® 35329 Rope Ramp Decal, For Use With Tugger® 640-M3 Cable Puller

Info:Browning® 1129659 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Keyway, 1 in Dia Bore, 4.032 in OD, #35 Chain, 32 Teeth, 3/8 in Pitch, Steel

Info:Browning® 1129634 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Keyway, 3/4 in Dia Bore, 4.03 in OD, #35 Chain, 32 Teeth, 3/8 in Pitch, Steel

Info:Browning® 1129626 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Keyway, 5/8 in Dia Bore, 4.032 in OD, #35 Chain, 32 Teeth, 3/8 in Pitch, Steel